
InfraRed Temperature
DMM Adaptor
Non-contact measurement of temperature
displayed directly on any DMM or recorder
• Direct non-contact reading of temperature on
200mV range of any multimeter or voltage
recorder/datalogger
• Wide measuring range of 14 to 662°F
(-10 to 350°C) with 2% accuracy
• Emissivity adjustment of 0.1 to 95
and 7:1 target ratio
• Output 1mV DC for every 1°F or °C
• Includes built-in banana plugs and 9V battery
CL425253 .........IR Temperature DMM adaptor
Type J Thermometer
Adjustable display for better viewing angle
• Wide measuring ranges of -60 to 1400°F
(-50 to 750°C) and 0.25% basic accuracy
• Ideal for field or benchtop use
• Large 0.5" LCD is built into
"flip-up" adjustable cover
• Complete with bead wire temperature
probe, 9V battery and neckstrap
CL43145J Type-J Thermometer
Wireless Thermometer System
Local and remote temperature monitoring of
up to 3 transmitters with one base station
• Base Station LCD displays local/remote
Temperature and Clock time
• Base station: 32°F to 140°F (0°C to 60°C)
Transmitter: -21.8°F to 157.8°F (-29.9°C to 69.9°C)
• Basic accuracy to ±1.8°F (±1°C) with 0.1° resolution
• Transmitters can be wall mounted up to
82ft (25m) from the base unit
• Operates at 433MHz; FCC approved
• System includes one base station with 2 AA batteries and
one transmitter with 2 AAA batteries
CLTE414 ............ Wireless Thermometer System
CLTE415 ............ Spare Transmitter for TE414
Relative Humidity Transmitter
Measure from 10 to 95%RH on any
4-20mA process device
• Transmits 4-20mA to a remote panel meter/controller
and includes 4 wires (2 for loop power, 2 for output)
• 3% measurement accuracy via precise thin film sensor
• Includes probe with 36" cable
• Easily interfaces with panel meter
or programmable controller
CL445604 .......... RH Transmitter
now $59
save $100
now $83
(was $189)
save $106
now $46
(was $99)
save $53
TE415 now $9
(was $20)
save $11
TE414 now $15
(was $39)
save $24
ORDER TODAY Limited Quantity!
CALL 781-890-7440 ext. 220 Minimum Order $25
ISO 9001 CERTIFIED
Logic Test Probe
Top of the line pen sized TL/CMOS logic
probe plus logic pulser
• Large LEDs and pulse memory
• Logic Test: detects pulses as narrow as
10nS at up to 50MHz, compatible with
TTL (DTL, HTC) or CMOS
• Logic pulse function: used to
inject a single pulse, a low-repetition
rate pulse (0.5Hz) or a high repetition
rate pulse (400Hz)
• Logic thresholds:
TTL "1" (HI LED) > 3.0±0.25VDC,
Logic "0" 9LO LED) < 0.75±0.25VDC
CMOS "1" (HI LED) > 60% Vcc±5%,
Logic "0" (LO LED) < 15% Vcc±5%
• Output current 100mA sink/source (5mA square wave output)
with low 1M sync input impedance to ensue that circuit under test is
not loaded down. Pulse width 100µs.
• Pulse has external sync for synchronization with computer clock circuit
CL401625 .......... Logic Test Prober
now
now
$16
(was $39)
save $23
Comentarios a estos manuales